NSW E-Bike Laws Explained: A Simple Guide for Riders

Getting familiar with legal e-bikes in NSW

Trying to work out whether an e-bike is legal in NSW can feel confusing at first. Different manufacturers promote their bikes in different ways, and terms like “EPAC” and “PAPC” often leave riders unsure about what actually matters.

The good news is that legality is not determined by the brand — it comes down to whether the bike meets NSW regulations. Recent updates to Australian and NSW compliance standards have made it much easier for riders to identify approved e-bikes and avoid models that fall outside the law.

The easiest way to understand NSW e-bike rules

A simple way to think about it is by comparing three types of transport:

• A motorcycle is powered entirely by an engine.

• A regular bicycle is powered completely by the rider.

• An e-bike combines both, where the rider pedals and the electric motor provides assistance.

Under NSW regulations, the key factor is that the rider must still be pedalling while the motor assists. If the bike can travel purely on motor power beyond the permitted limits, or exceeds legal speed and power restrictions, it is no longer considered an e-bike under NSW law.

In that situation, the bike may be classified as a motor vehicle, making it illegal to use on public roads, shared paths, and cycleways without proper registration and licensing.

The Two Approved E-Bike Classifications in NSW

Quick overview

When buying an e-bike in NSW, always check that the bike is classified as either a PAPC or an EPAC. Approved bikes should include certification details or a compliance label attached to the frame.

Look for markings similar to:

• “Certified EPAC to EN15194”

• “Certified to UL 2849”

• Other recognised compliance standards and certification numbers

These markings indicate the bike has been tested to meet recognised safety and legal requirements.

1. Power Assisted Pedal Cycles (PAPC)

A Power Assisted Pedal Cycle, commonly called a PAPC, is an electric bicycle fitted with a motor output of up to 200 watts.

These bikes are designed to assist the rider only while pedaling and have been recognized as legal in NSW for decades.

Key PAPC features:

• Maximum motor power: 200W

• Pedal assistance required for movement

• Designed primarily to support rider pedaling effort

2. Electrically Power Assisted Cycles (EPAC)

An Electrically Power Assisted Cycle (EPAC) is the most common type of compliant e-bike seen across NSW today.

EPACs are allowed to use motors with up to 500 watts of continuous power output, giving riders improved performance while still remaining road legal.

This category was introduced to better align NSW regulations with internationally recognized European e-bike standards.

Key EPAC features:

• Maximum continuous motor power: 500W

• Motor assistance cuts out beyond legal speed limits

• Limited low-speed throttle assistance only

• Designed for everyday commuting and recreational riding

Main Differences Between PAPC and EPAC E-Bikes

Motor Power

• PAPC: Up to 200W motor output

• EPAC: Up to 500W continuous motor output

Throttle & Pedalling Rules

• PAPCs require pedalling for motor assistance at all times

• EPACs may allow limited motor-only assistance up to 6 km/h before pedalling is required

Final tip before buying an e-bike

Before purchasing any e-bike in NSW, always check for compliance markings, certification information, and legal power ratings. While many e-bikes may look similar, not all are approved for use on NSW roads and bike paths.

For complete technical requirements — including weight limits, design standards, and safety regulations - If you would like to learn more you can refer to the official NSW government e-bike guidelines - HERE.